Olivetti NETTUN@3000 int'l, User Manual, Page: 62 / 133

4-4
PROGRAMMING VAT RATES - CODE 308
PROGRAMMABLE PARAMETERS
For each VAT rate a number of parameters can be programmed, as indicated in the
following table:
FUNCTION PROGRAMMABLE FIELDS FACTORY SETTING
Rate description Max. 29 characters, alphanumeric VAT_1
Rate value (as
percentage) 4 figures max. (from 0,01 to 99,98) NO TAX
As a prerequisite to programming, you must have run a Z10 Report, a Z20 Tax
Extraction Report, and any other reports that are requested before starting to
program.
In the [Reports] environment, the key [Mandatory reports for Vat Variation] can be
used to execute automatically all the reports required.
Operating Procedure
1.
. 3 . . 0 . . 8 . . X .
On the lower row of the operator display, a
descriptor is proposed for the first VAT
rate.
2. [ MANAGEMENT TYPE ] 0 followed by
. X . for VAT
1 followed by . X . for ADD ON
3. [ ALPHANUMERIC
CHARACTERS ] . X .
Customise the descriptor.
4.
[ NUMERIC CHARACTERS ] . X .
Set the VAT rate as a percentage.
5.
Repeat sequences 3 and 4 for any other
VAT you want to add (up to a maximum
of 7).
•
if the tax extraction reports have not been run, the message appears
“RUN REPORTS”.
•
To annul the percentage programmed, enter . 0 .
•
To reprogram “NO TAX” enter . 8 . (note that TAX 8 cannot be modified and
corresponds to the TAX EXEMPT setting.