Olivetti NETTUN@3000 int'l, User Manual, Page: 110 / 133

9-8
RESTORING A SECURITY (BACKUP) COPY OF CASH REGISTER FROM A
USB PEN – CODE 351
Code 351 restores a backup copy of the cash register that was previously saved.
Preliminary Operations
Data archival on the USB pen executed with the option SET 350 is saved in a file
“<daymonthyear-cashregisterid>-backup.tar ” archived in the folder [ crf3000\backup ].
To be able to restore it using the SET 351 command, you must rename it from:
“<daymonthyear >-backup.tar ” to backup.tar using a PC.
Note: More than one backup copy could be present. Choose the most appropriate
one using as a reference the archival date.
Operating Procedure
1.
Insert the USB pen into the cash register.
Note: If you try to restore the data without first inserting the pen, an
error is displayed: “STICK NOT INSERTED”.
Note: Before proceeding, you may be required to print the
Management reports indicated by the cash register (ACTIVE
ACCOUNT). You will not be allowed to proceed with the restore
operation until you do so.
2.
Select SET mode for the register.
3.
. 3 . . 5 . . 1 . . X . On the display the message appears:
“DESTRUCTIVE OPER. PROCEED?”.
Press the X key to continue.
On the display you are asked if you want to format or not:
“FORMATS ENABLED: 1, DISABLED: 0.
If you choose 1 the data in the cash register is deleted, if you choose 0
the data is maintained
At the end, a message is shown on the display:
“346-READING DATA/WAIT” and reading of the data starts.
a. If the data on the pen is read successfully, the message is displayed:
“READ EXECUTED/REMOVE STICK”
b. If, however, errors have occurred during reading, the warning
appears “READ ERROR/REMOVE STICK”.
Note: Try repeating the procedure, making sure that the pen is
inserted correctly. If the error re-occurs, contact Technical
Services
4.
The procedure has completed. The register prints a ticket (ECR
CONFIGURATION) that shows the current configuration of the cash
register. The ticket is saved in the EJ.
5.
Remove the pen. When the USB pen is removed, the machine
automatically enters SET mode.