Olivetti Jet-Lab 490, Instructions Manual

Page: 18 / 48

12
B
ASIC TRANSMISSION AND RECEPTION OPERATIONS
Now that your fax machine has a name and number, you can
use it to:
• send documents (also in broadcast mode, from the memory, or by
polling)
• receive documents (also by polling)
• make telephone calls (see the chapter " To make a call ")
• copy documents (see chapter " To make a copy ").
T
O SEND A DOCUMENT
W
HAT DOCUMENTS MAY BE USED
Dimensions
• Width min. 210 mm - max. 216 mm
• Length min. 148 mm - max. 600 mm
Thickness
from: 80 gr/m
2
(max. 20 sheets)
60 - 90 gr/m
2
(max. 10 sheets)
50 - 140 gr/m 2 (1 sheet at a time)
For documents of a different size from those specified , you
can use a transparency with a rear sheet as a document holder.
N
EVER USE
• curled paper
• excessively thin paper
• torn paper
• damp or set paper
• excessively small paper
• crumpled paper
• carbon paper
In addition, in order to avoid damaging your fax machine and invali-
dating your guarantee, make sure that the documents you are to use
do not contain:
• staples
• paper clips
• adhesive tape
• correcting liquid or glue that has not yet dried.
For all these cases, photocopy the document and send the copy.
T
O PLACE THE DOCUMENT IN THE ADF
1. Insert the automatic document feeder in the slot until it clicks into
position.
Insert the document,
without forcing , in the ADF(automatic docu-
ment feeder) with the side to be sent facing upwards. The bottom
edge of the original is fed into the ADF and the display shows on
the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
T
O ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some adjust-
ments so as to optimize the printing quality.
T
O REGULATE THE CONTRAST
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
CONTRAST: NORMAL
|
/
}
To view the other available options: "DARK" and "LIGHT".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
The contrast should be regulated on the basis of the
following criteria:
• NORMAL , if the document is neither too light nor too
dark . "NORMAL" appears on the bottom line of the dis-
play.
• LIGHT , if the document is dark . "LIGHT" appears on the
bottom line of the display.
• DARK , if the document is light . "DARK" appears on the
bottom line of the display.