14
3. Take the cartridge out of its pack-
age and, holding it on both
sides, peel off the film covering
the nozzles.
1. Push the paper support exten-
sion in the slot until it clicks into
position.
2. Holding the sheets by their up-
per edge, insert them by letting
them "drop" into the ASF without
folding or forcing them.
I M P O R T A N T
If you add sheets (max. 40) to the ASF, make sure you place
them
under
and not on top of those already present.
The fax machine has a
memory
that enables it to
receive
up
to
19 pages
even if you do
not add any paper
.
I
NSERT
THE
CARTRIDGE
I M P O R T A N T
Once the cartridge provided with the machine has run out,
r e m e m b e r
o n l y
t o u s e
o r i g i n a l c a r t r i d g e s
(
s e e c o d e
printed at the end of the manual
).
The use of non-original or refilled cartridges makes the prod-
uct's guarantee null and void.
If, after the cartridge has been installed, the "CHECK CAR-
TRIDGE" message appears again, try removing it and then
reinserting it, pressing it more firmly into position. If the mes-
sage remains on the display, remove the cartridge and clean
the electrical contacts of the cartridge and the carriage, see
"
To clean the electrical contacts of the print cartridge
",
section "
Maintenance operations
".
1. Lower the handset and place it
on a stable surface.
4. Insert the cartridge in its com-
partment with the electrical con-
tacts facing towards the print car-
tridge compartment.
5. Push the cartridge until it clicks
into place.
I M P O R T A N T
This device uses a print cartridge that will allow you to
print up to 450 pages*.
*
Based on Test Chart ITU-TS n.1 (black coverage = 3,8%).
Once the cartridge has been inserted
,
the operator con-
sole closed and the handset replaced
, the fax machine
starts the
nozzle cleaning and checking procedure
, which
is completed by:
•
the
printing
, on the sheet loaded automatically, of a diagnos-
tic test sheet containing:
- a
numbered scale
, for checking the flow of ink and the
electrical circuits of the cartridge nozzles.
- a group of
graphics and text
, so that the printing quality
may be evaluated.
•
the display shows the message: "CHECK CARTRIDGE",
"1=EXIT 0=REPEAT".
10.
To return the fax machine to its initial stand-by mode,
press the key:
11.
If you want to move back one function, press the key:
S
ETTING
UP
THE
FAX
MACHINE
F
EED
THE
PAPER
INTO
THE
MACHINE
2. Open and lift the operator con-
sole as indicated by the arrows.
1
2
Summary of Contents for Fax-Lab 128
