4 0
7.
To confirm the setting, press the key:
8.
To return the fax machine to the initial stand-by mode,
press the key:
9.
If you want to move back one function, press the key:
O
UTGOING
MESSAGE
ONLY
Using this function, whenever an incoming call is re-
ceived, the TAD plays the OGM 1 but does not record
any incoming messages.
You can use this function when you expect to be away
for a long time and it would not be possible to record all
messages received in your absence.
In this case, in place of the ordinary outgoing message,
it is advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
1.
Press the key:
The display shows:
MENU
RECEPT. SET-UP
2.
Press the keys
until the display shows:
MENU
TAD SET-UP
3.
Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4.
Press the keys
until the display shows:
TAD SET-UP
ANNOUNCE ONLY
5.
To confirm the setting, press the key:
The display shows:
ANNOUNCE ONLY
NO
6.
To view the other available option, "ANNOUNCE ONLY
- YES", press the keys:
7.
To confirm the setting, press the key:
If outgoing message 1 has already been recorded, skip
straight to step
11
. Otherwise the display shows:
OGM 1
RECORD
8.
Press the key:
The display shows:
RECORD OGM 1
LIFT HANDSET
9.
Lift the handset.
The display shows:
RECORD OGM 1
<|> TO RECORD
10.
To start recording the message, press the key:
You have 20 seconds (counted on the display) to record
your message:
•
if the message lasts
less than 20 seconds
, when you
reach the end of the message hang up.
•
the fax machine automatically plays back the message
you have recorded.
11.
To return the fax machine to the initial stand-by mode,
press the key:
S
ILENT
RECEPTION
OF
INCOMING
MESSAGES
Using this function you can receive messages confi-
dentially. In other words, the TAD receives messages
without playing them over the speaker so that any other
persons present cannot hear your messages.
1.
Press the key:
The display shows:
MENU
RECEPT. SET-UP
2.
Press the keys
until the display shows:
MENU
TAD SET-UP
3.
Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4.
Press the key:
The display shows:
ICM ON SPEAKER
NO
5.
To view the other available option, "ICM ON SPEAKER
- YES", press the keys:
Summary of Contents for Fax-Lab 128
