Olivetti d-Copia 2500MF, Service Manual

Page: 38 / 296

2H0/2HZ
1-3-4
Mode setting U324 Setting the main charger cleaning indication ON
*1,*2
U326 Setting the black line cleaning indication ON/8
*1,*2
U328 Side ejection setting OFF
*1,*2
U332 Setting the size conversion factor 1.0
*1,*2
U339 Setting the drum heater ON/OFF 0
*1,*2
U341 Specific paper feed location setting for printing function -
U342 Setting the ejection restriction ON
*1,*2
U343 Switching between duplex/simplex copy mode OFF
*1,*2
U345 Setting the value for maintenance due indication -
Image
processing U402 Adjusting margins of image printing 75/85/85/95/155/110
*1
U403 Adjusting margins for scanning an original on the platen 2.0/2.0/2.0/2.0
*1
U404 Adjusting margins for scanning an original from the DP 3.0/2.5/3.0/4.0
*1
U407 Adjusting the leading edge registration for memory image
printing 47
*1
U411 Adjusting the scanner automatically -
U425 Setting the target -
Network
scanner U510 Setting the enterprise mode Inch specifications: ON
*1,*2
Metric specifications: OFF
*1,*2
Others U901 Checking/clearing copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking/clearing counts by optional devices -
U906 Resetting partial operation control -
U908 Checking the total counter value -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper sizes -
U920 Checking the copy counts -
U927 Clearing the all copy counts and machine life counts (one
time only) -
U928 Checking machine life counts -
U931 Setting the automatic toner install OFF
*1,*2
U933 Setting the fax backup kit -
U935 Relay board maintenance -
U942 Setting of deflection for feeding from DP 0/0
*1
U984 Checking the developing unit number -
U985 Displaying the developing unit history -
U989 HDD scandisk -
U990 Checking/clearing the time for the exposure lamp to light -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section Item
No.
Content of maintenance item Initial
setting*
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021
Service Manual Y108620-5