Olivetti D-COLOR MF2604en Operation Manual Download Page 89

Page: 89 / 205

FAX Operation (Advanced)

4-30

After completing the settings, click

Submit

to save the settings.

Editing Destinations

FAX > Common > Forward > Forward > Edit

Use this page to edit destinations.

The settings available on the Forward - Edit page are shown below.

Forward Destination

Settings

Displays the registered destinations. Click the checkboxes

for the destinations to be enabled so that they are ticked. To

change a destination, click the name of the destination to be

changed. The Forward - Edit page is displayed.

Change the destination information and click

Submit

Delete

To delete a destination, click the checkbox for the destination

to be deleted so that it is ticked and then click

Delete

Item

Description

Address Type

Select the destination type.
•

E-mail

•

SMB

•

FTP

•

FAX

Item

Description

Summary of Contents for D-COLOR MF2604en














































































































































































































Search results

Summary of Contents for D-COLOR MF2604en

Reviews:

Related manuals for D-COLOR MF2604en

Brands by name

Popular brands

Olivetti D-COLOR MF2604en, Operation Manual

Search results

Summary of Contents for D-COLOR MF2604en

Reviews:

Related manuals for D-COLOR MF2604en

Brands by name

Popular brands