31
When the button is red, the pause function is not engaged, when green it is engaged
and the deck will not shake.
6.1.3
Deck End Raise Controls
The deck end raise is controlled from the middle of the control panel screen. See Figure 6.6.
To change the deck position, which is in units of %, simply tap on the grey input box to
enter an exact value into the keypad that pops up, or use the slider bar to increase or
decrease the end raise.
4
. There are also two lights that will indicate when the deck should
be extending or retracting.
Figure 6.6:
Deck End Raise Controls
6.1.4
Sensor Readouts
Each DVX Dryer has a temperature and humidity sensor pair in both the airchest and
dusthood for each zone. The number of zones is equal to the number of fan controls.
The sensors in the airchest are represented by the red heated air sybol, while the similar
symbol in the dusthood is blue for the cooler air leaving the dusthood under normal
operation. See Figures 6.7 and 6.8
Figure 6.7:
Airchest Sensors
Figure 6.8:
Dusthood Sensors
6.1.5
Heater Controls
To control the heat in the zones with a heater, there is a start button and a grey input box
for setting the heat desired, located above the fan controls in each zone. See Figure 6.9.
4
see Oliver’s training video entitled ”Changing the deck end raise”
