Oliver 5018, Owner'S Manual

Page: 10 / 52

7
ADDITIONAL SAFETY RULES FOR
WOODWORKING MACHINERY
1. Read and understand the operation manual before operation.
2. Keep hands away the cutting area.
3. Always disconnect the power source before making any adjustments.
4. Do not operate the machine in case air pressure does not reach the
normal working pressure. Normal working pressure for this cut off saw is
5kg/cm2.
5. With the saw motor running try to press the foot switch and check if the
motion cycle is normal or not.
6. Make sure the height of the hold-down clamp is properly adjusted.
7. Make sure the sawblade running direction is correct.
8. Do not cut warped wood. The workpiece must be sit flat on the table
without rocking.
9. When cutting long workpiece, use infeed and outfeed conveyor table for
support.
10. The cut piece is removed by pulling it out or pushing it out with a wood
stick.
11. Never try to remove the cut-off piece until the power is off and sawblade
has stopped.
12. Always use fence to position and guide workpiece. Do not use hands to
support the work.