1708 SELF-ACTUATING LIDDER
4/18/96
1708S20014
MAINTENANCE
•
If the machine has been operating, allow the unit to cool before working on it.
CAUTION
•
CAUTION HOT:
The heater cover and upper platen are very
HOT!
Caution must be used to
protect yourself and others.
•
Always make sure the machine has been unplugged from power and air before servicing.
•
The machine is to be serviced by authorized personnel only.
•
Use only factory authorized replacement parts.
•
To prevent damage to the pneumatic components drain the filter/regulator bowl frequently.
TROUBLE SHOOTING
Symptom
Corrective Action
Heater
won’t
power
up
1.
Verify
that
the
power cord is plugged in.
2. Press “ON/RESET” on power cord switch
3. Press Reset on Circuit Breaker
Heated upper platen won’t cycle
1. Verify that the air line is plugged in.
2.
Verify
air
pressure
at
the
filter/regulator
Lid folding, shifting or sliding off in the machine
1. Verify that the adhesive side of lid is down.
2. Verify that the trays are not over filled.
3. Clean the heated upper platen.
Poor
seal
quality 1.
Verify
the
regulated
pressure
setting.
2.
Verify
the
temperature
setting.
3. Verify the dwell time setting.
4.
Clean
the
heated
upper
platen.
Oliver Products Company 24 HR Emergency Service 1 800 554-5603
Summary of Contents for 1708-N
