Olin DVR-130, User Manual

Page: 13 / 41

12
FUNCTION OPERATIONS
Load Discs
After correctly connect the Player to other apparatus, turn on the player, then follow below steps.
NOTE: Please check the Disc condition before putting it in the tray, bad quality or damaged discs will
damage the pickup inside the player, and shorten its working time.
Function Operation Instruction
1. Turn on the player
Press the POWER button. then the player will
search for the disc automatically.
3. Load the disc
Put the disc in the tray
as shown in the right
figure.
2. Open Disc tray
Press the EJECT button to open the disc tray.
4. Press the EJECT button to close the disc
tray and begin playing.
STOP
During playback, press the STOP button on remote control to stop playback. For DVD discs, after
pressing the STOP button once, if you press the ENTER button, then the player will play from the
stopped point.
PAUSE
Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to achieve
frame-by-frame playback.
REPEAT
1. Use the REPEAT button to repeat a title, a chapter, a track and a disc respectively according to
different discs, and also to cancel repeat.
2. Use the A-B button to repeat section A to B. Press it once to set the starting point A, twice to set
the ending point B, and the third time to cancel repeat.
(NOTE: Some discs do not support repeat function. )
ENTER
Press the ENTER button to start playback. Press the POWER button on remote control to enter
standby status, and press it again to resume playback status. If there is no operation for a long time,
the player will automatically enter screen saver status and then enter standby status.