Olimpia splendid Unico Edge 30 SF EVA, Instructions For Use And Maintenance Manual

Page: 73 / 258

UNICO
EDGE R32
EN - 23
ENGLISH
3.5 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS
3.5.1 - Main switch-on and running management
• Once these operations have been carried out, the machine may be regulated using the remote control.
In order to transmit commands to the indoor appliance, point the front of the remote control toward the
appliance’s control panel.
The device emits a beep when it receives a command.
• The maximum distance from which the appliance can be controlled is about 8 meters (with charged bat -
teries).
3.5.2 - ECO key
• Pressing the B2 key on the remote control activates the energy saving function, automatically optimizing
the machine functions, the D11 symbol appears on the display.
3.5.3 - Turning the unit ON/OFF
• Press key B1 on the remote control to activate or deactivate (stand-by) the air conditioner.
The control system of the unit is equipped with memory, for this reason all the settings won’t be lost when
shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated turning the main
switch off or unplugging the machine from the mains.
3.5.4 - Operation in “Cooling” mode only
• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press the key B4 on the remote control several times until the D3 symbol appears
on the display.
• In this run mode, the required temperature and fan speed can be set.
After three minutes (as a maximum) from activation in this operating mode the compressor will start and
the appliance starts emitting cold air.
• The start of the compressor is indicated by the lighting up of the LED B (green) located on the console
(fig.40).
3.5.5 - Operation in “Dehumidification” mode only
• When used in this mode, the air conditioner eliminates the humidity in the room.
This function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.
• In this mode, both room temperature and fan speed settings are ignored, which correspond to minimum.
• Any indication of fan temperature and speed disappears from the remote control display.
• To activate this mode, press the B4 key on the remote control several times until the D4 symbol and the
D1 automatic ventilation symbol appear on the display.
• In this operating mode it is normal for the air conditioner to function intermittently.