Olimpia splendid Unico Edge 30 SF EVA, Instructions For Use And Maintenance Manual

Page: 83 / 258

UNICO
EDGE R32
LED D LED B H
LED C LED A
G
EN - 33
ENGLISH
Table “TAB1”
DESCRIPTION
LED D
green
LED C
yellow
LED B
green
LED A
red
Signalling of the machine in stand-by OFF OFF OFF OFF
Signalling of the machine in operation
ON
x x x
Signalling of timer activation, machine on hold OFF
ON
OFF OFF
Signalling of timer activation, machine running ON ON x x
Signalling of the ignition of the refrigerator compressor ON x ON x
Indication of any need to clean the air filter. ON x x ON
ON : led on - OFF: led off - x: indifferent
4.3.4 - Console alarms
In the presence of an alarm, the LEDs flash as indicated in table “TAB2”.
If one of the alarms persists for more than three minutes, contact an Olimpia service centre.
Table “TAB2”
DESCRIPTION
LED D
green
LED C
yellow
LED B
green
LED A
red
External air temperature probe faulty x x 0 1
Condenser temperature probe faulty x x 0 2
Inlet temperature probe faulty x x 0 3
Compressor current protection x x 0 4
Communication error x x 0 5
Power line overcurrent x x 0 6
Compressor current protection not suitable x x 0 7
Power board DC voltage problem x x 0 8
Current anomaly x x 0 9
Condenser temperature too high x x
1
0
UIPM protection x x
1 2
EEPROM reading error x x 1 3
EEPROM writing error x x 1 4
Inlet temperature too high x x 1 7
Room temperature probe faulty 0 1 0 0
Evaporator temperature probe faulty 0 2 0 0
Evaporator temperature too low 0 3 0 0
Evaporator temperature too high 0 4 0 0
Communication error 0 5 0 0
Evaporating fan motor failure 0 8 0 0
Water level alarm 1 1 0 0
1-9 : number of flashes (1 flash = 1 second on, 1 second off) - 0: led off - x: indifferent