background image

US-ENGLISH

US-ENG- 4

3.

THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGE TO PROPERTY

OR PERSONS CAUSED BY FAILURE TO FOLLOW THE INSTRUCTIONS IN

THIS MANUAL.

4.

OLIMPIA SPLENDID reserves the right to modify at any time its models

without changing the fundamental characteristics described in this manual.

5.

The installation and maintenance of air-conditioners like this one may be

hazardous as they contain a cooling gas under pressure as well as powered

parts.

6.

Therefore,  the  installation,  first  startup  and  subsequent  maintenance

should be carried out exclusively by authorized, qualified personnel.

7.

Failing to comply with the instructions contained in this manual and using

the unit with temperatures exceeding the permissible range will invalidate

the warranty.

8.

Routine maintenance of the filters and general external cleaning can be

done by the user as these operations are not difficult or dangerous.

9.

During the assembly and each maintenance operation, always pay attention

to the warnings described in this manual and on the labels affixed inside

the appliances, and respect anything suggested by common sense and

those of the Safety Norms in force in the place of installation.

10.

 Always wear Personal Protection Devices when servicing the unit.

 

These

units  MUST  NEVER  be  installed  in  rooms  where  flammable  gas,

explosive gas, or excessive humidity (laundry rooms, greenhouses, etc.),

or in rooms where there are other units that generate excessive heat.

11.

During operation, ensure that the unit is not covered or obstructed by

flammable material (for instance: curtains, drapery, blanket, etc.).

FIRE HAZARD !

12.

 Should components need replacing, always use OLIMPIA SPLENDID

original spare parts.

13.

IMPORTANT!

To avoid any risk of electric shock always deenergize the unit before making

electrical connections or any maintenance procedures.

14.

IMPORTANT!

Do not allow R-410A to escape into the atmosphere: R-410A is a fluorinated

greenhouse gas, as cited in the Kyoto Protocol, with a Potential Global

Warming effect (GWP) = 2088.

15.

WARNING

The unit should be used for the exclusive purpose of producing hot or cool

air for the sole purpose of obtaining a comfortable temperature in the room.

Improper use of the equipment, which may cause injury/damage to persons,

property or animals, relieves OLIMPIA SPLENDID of any liability.

Summary of Contents for Maestro Pro Inverter 12 HP










































Reviews: