Olimpia splendid Bi2 WALL TR 1000, Instructions For Use And Maintenance Manual, Page: 56 / 449

EN - 8
ENGLISH
6. Install the appliance, the power supply cables and connection cables
at a distance of at least 1 metre from television and radio appliances
in order to prevent interference on the images or noise. Depending on
the length of the radio waves, 1 metre may be insufficient to eliminate
noise.
7. Don’t install the air conditioner in the following locations:
• There is caustic gas (the sulfide, for example) existing in the air
(near a hot spring)
• The Volt vibrates violently (in the factories)
• In kitchen where it is full of oil gas
• There is strong electromagnetic wave existing
• There are inflammable materials or gas
• There is acid or alkaline liquid evaporating
• Other special conditions.
8. Do not use the appliance for purposes different than the declared
use. To prevent deterioration of the quality, do not use the unit to cool
precision tools, foodstuffs, plants, animals or works of art.
9. Before cleaning, be sure to stop the operation, turn the breaker off or
pull out the supply cord, otherwise, an electric shock and injury may
result.
10. Be sure the air conditioner is grounded.
11. In order to avoid electric shock, make sure that the unit is grounded
and that the earth wire is not connected to gas or water pipe, lightning
conductor or telephone earth wire.
12. Do not operate the air conditioner with a wet hand. An electric shock
may happen.
13. Do not touch the heat exchanger fins. These fins are sharp and could
result in cutting injuries.
14. Do not position objects, which could be damaged by humidity, under
the appliance. Condensate can form if the level of humidity exceeds
80%; the drain outlet is blocked or the filter is dirty.
15. After a long use, check the unit stand and fitting for damage. If dam -
aged, the unit may fall and result in injury.
16. To prevent the lack of oxygen, ventilate the environment adequately
if the appliance is used along with appliances fitted with burner.
17. Organise the drain pipe in a way to ensure regular condensate draining.
Incomplete drainage can cause damage to the building, furniture, etc.
due to humidity.
18. Do not touch the internal components of the electric box.
Do not remove the front panel. Some parts inside are dangerous to
touch, and a machine trouble may happen.