OLI eLINE 880876, User Manual

Page: 7 / 60

77
EN
DE
RU
CALIBRATION
To ensure the correct operation of the product in under various environmental and installation conditions, the
infrared sensor is equipped with an automatic calibration function.
The eLINE control plate’s infrared sensor system has a self-calibrating start-up routine that allows the user
to change the operating parameters of the control plate before it goes into full operation, ensuring that the
system users cannot tamper with the product.
After connecting the product to the mains, the infrared sensor will go into calibration which will be signalled
with a flash of the LED. Then, it will be available for manual parameterisation and after that period, a set of 3
consecutive flashes will signal the entry into normal operating mode.
8 - FIRST-TIME USE
MANUAL PARAMETRISATION
STAND BY
After the calibration period, it is possible to manually change some operating parameters of the system for 3
minutes.
- During the period of manual parameterisation of the system, the functions of: automatic flushing, manual
flushing, hygienic flushing, pre-flushing and cleaning mode will not be active and will come into operation after
the end this period.
After the manual parameterisation period is concluded, the system will do a small sensor recalibration and will
be ready to be used.
X3 X1
CALIBRATION STAND BY
MANUAL
PARAMETERISATION