OLI eLINE 880876, User Manual

Page: 8 / 60

88
EN
DE
RU
2
1
After connecting the control plate to the power supply, the plate will confirm it has power through 1 flash.
The control plate is now be available for
parameterisation for a period of 3 minutes.
After 20 seconds, you should see another
flash of the LED signalling the conclusion of
the calibration.
CLICK
2
CALIBRATION
1
Note: To ensure the correct operation of the product, the calibration must be made with the
sensor/control plate applied to the wall. If this step is not taken, the product may not detect the
user and unwanted flushes may occur. Should any of these situations happen, turn off the system
and restart the procedure.
X1
X1