OLI eLINE 880876, User Manual

Page: 15 / 60

15 15
EN
DE
RU
12 - ADD-ONS
BT 4.0 Bluetooth Low Energy
Approx. 10 m (free field), depending on mobile device and
on installation
Bluetooth Range
Power Consumption
Bluetooth
15 x 35 x 24.5 mm
Approx. 12 mA permanent
Approx. 38 mA maximum
4 pole approx. 200 mm, KCC SK-2 female connector
compatible
Size
Cable
BT 4.0 Bluetooth Low Energy
Aprox. 10 m (campo livre), dependendo do dispositivo móvel
e da instalação
Alcance Bluetooth
Consumo de Energia
Bluetooth
15 x 35 x 24.5 mm
Aprox. 12 mA permanente
Aprox. 38 mA máximo
4 pólos, aprox. 200 mm, conector femea KCC SK-2
compatível
Cabo
Dimensões
PT
EN
POWER OFF
BLUETOOTH
This system has 2 sets of acessories that allow you to quickly expand its functionalities and with an easy
installation.
- Bluetooth
This product allows the access via Bluetooth technology to the configuration of all the sensor’s functionalities
and the statistical recording of the flushes through the installation of the appropriate receiver, compatible with
all versions of the product.
- Radio and Remote Control
This product allows you to flush remotely without having to contact the product directly, through a 868.4 MHz
radio connection and a remote control designed to facilitate usability in situations of constrained mobility. The
installation of the appropriate receiver is required.
1 2
Assemble the Bluetooth receiver in the
appropriate assembly point.
Disconnect the 2-pin connector, identified with
red marker, to ensure that the system is not
connected to the power grid.
The Bluetooth receiver allows Bluetooth access to the system with compatible devices. The installation of this
accessory should be carried out by accessing the inside of the tank and with the power supply disconnected.