Olfer CBU-DA-1P, Instruction Manual

Page: 2 / 4

Instructions manual
CBU-DA-1P
OLFER EN-V1.0 22 January 2024 2
Technical data
Nominal input voltage 110 … 277 Vac
Input voltage range 99 … 305 Vac
Input frequency 47 … 63 Hz
Input current ≤ 40 mA
Power consumption ≤ 2,5W
Power consumption standby < 0,3W
AC loop max. current 5 A
Push Button input Normally open push button (N.O.)
Output control interface DALI
Max. number of drivers connected 50 pcs
DALI
Bus voltage 12-14 VDC
Guaranteed current 100 mA
Maximum current 250 mA
RF
Communication interface Bluetooth Low Energy (BLE) 4.0 / 5.0
Communication protocol Casambi
Operating frequencies 2402 – 2483 MHz
Max. transmission power +7 dBm
Firmware update OTA (Over The Air)
Protections
Line permanent over voltage (non replaceable fuse), line surge over
voltage, over temperature.
Temperature monitoring Internal temperature is displayed in Casambi App
Operating temperature range -20ºC … +50ºC
Connector Screw terminals (Max. torque: 4 Lb.In / 0,5 Nm)
Wiring
Solid size
0,2 … 3,3 mm2 / 30 … 12 AWG
Stranded size
Wire strip length
6,5 mm
IP IP20
Enclosure material Plastic (UL94-V0)
Dimensions 44 x 57 x 25 mm
Weight 58 g (carton box included)
Standards
EN 61347-1:2016, EN 61347-2-11:2003, EN 55015:2013, EN 61547:2011,
EN 61000-3-2, EN 61000-3-3, EN 301489-1, EN 301489-17
DALI standards
IEC 62386 part 101, 103. Supports DALI-2 light and motion sensors
(IEC62386 parts 303-304). Supports luminaire, energy and diagnosis
data (IEC62386 parts 251-252-253)
Directives
(LVD) 2014/35/UE, (EMC) 2014/30/UE, (RED) 2014/53/UE,
(RoHS) 2011/65/UE, (REACH) 1907/2006.