background image

04

Before using your TV, please read these instructions completely, and 
keep this manual for future reference. Carefully observe and comply 
with all warning, cautions and instructions placed on the set or described 
in the operating instructions or service manual. 

       

WARNING

To guard against injury, the following basic safety precautions should 
be observed in the installation, use and servicing of the set.

Follow operating instructions

 

All operating instructions must be followed.

Power Sources

This set should be operated only from the type of power source indicated 
on the serial/model plate or specification label.  If you are not sure of the 
type of electrical power supplied to your home, consult your dealer or 
local power company.  For other units designed to operate on batteries 
or another power source, refer to the operating instructions.

Grounding or Polarization

This set is equipped with a polarized AC power cord plug 
(a plug having one blade wider than the other), or with a three-wire 
grounding type plug (a plug having a third pin for grounding).

Polarized AC Power Cord Plug

The plug will fit into the power outlet only one way.  This is a safety 
feature.  If you are unable to insert the plug fully into the outlet, try 
reversing the plug. If the plug still fails to fit, contact your electrician 
to have a suitable outlet installed. Do not defeat the purpose of the 
polarized plug by forcing it in. 

Wall Outlet

Do not use a poor fitting outlet.  Insert the plug fully into the outlet.  
If it is loose, it may cause arcing and result in fire.  Contact your 
electrician to have the outlet changed. 

Wiring

Unplug AC power cord when wiring cables.  Be sure to unplug the AC 
power cord for your safety, when hooking up. 

AC Cord Protection

Do not allow anything to rest on or roll over the AC cord, and do not 
place the set where the power cord is subject to wear or abuse. The AC 
cords must be routed properly to prevent people from stepping on them 
or objects from resting on them. Check the cords at the plugs and unit 
display.

Import ant Safety Precautions

Summary of Contents for LT42HVi


































































































Reviews: