34
Remote Control Guide
Battery Installation
1.Push the tab and pull it out as illustrated below.
2.Insert two size AAA batteries (supplied) by matching the (+) and (-)
on the batteries to the diagram inside the remote control's battery
department.
3.Replace the cover back and make sure the cover "snaps" into the
remote control.
Note:
1.The display unit comes with two new AAA batteries as accessories.
However, due to uncontrollable causes, the electricity of the
accessorized batteries may be partially or completely drained. We do not
warrant the quality of the batteries in any case since many factors are
considered. If replacement is needed, please purchase two AAA
batteries.
2.Handle remote with care. Avoid dropping it, placing in direct sunlight,
near a heater, high areas of humidity or getting it wet. If the remote
gets wet, please wipe it dry immediately. In the event of the remote
not working properly or is inoperational, a replacement of remote control
may be required.
3.If you do not use the remote control for a long period of time, please
remove the batteries and store in a cool place to preserve battery life.
4.Do not mix new and used or with different types of batteries for operation.
