BURNER INSTRUCTIONS
ALLOW A FIVE (5) MINUTE COMPLETE SHUTOFF
PERIOD BEFORE APPLIANCE IS RE-LIGHTED.
Initial Start of Burner:
1.
Remove service access panel.
2.
Check burner for proper connection to gas lines.
3.
Turn gas supply to burner on.
4.
Depress the gas valve control knob on the combination
gas valve and turn to on position.
5.
Replace service access panel.
6.
Turn on burner switch located on front control panel.
7.
Set thermostat to desired temperature.
To Put Burner Out of Operation for an Extended
Period:
1.
Set all switches located on front of unit to “OFF” position.
2.
Unplug unit from electrical source.
3.
Turn gas supply off.
4.
Depress the gas valve control knob on the combination
gas valve and turn to off position.
5.
Replace service access panel.
