WX16 User Manual | 59
2.4 GHz Radio Modem
900 MHz Radio Modem
Note: Note:
10-0357 Has One Radio Module Installed
10-0364 Has One Radio Module Installed
10-0358 Has Two Radio Modules Installed
10-0365 Has Two Radio Modules Installed
Figure 7.1
7.1
Radio Setup Menu
Radio modules must be connected to the WX16’s
master
port for
RADIO SETUP
.
Pressing the EDIT key with the arrow pointing to the
Radio Setup
menu brings the
RADIO CONFIG
menus to the screen (right side of Figure 7.2).
•
Hop Channel
may be set from 1-32 using the WX16 keypad and assigns the
pseudo-random radio frequency hopping pattern. A transceiver will not go
InRange
of or communicate with a transceiver operating on a different Hop
Channel.
•
System ID
may be set from 1-255 using the WX16 keypad and is similar to a
password character or network number and makes network eavesdropping
more difficult. A transceiver will not go in range of or communicate with a
transceiver operating on a different System ID.
•
Mode
may be set for
CLIENT
or
SERVER.
For a single WX16 communicating
to up to sixteen battery-powered OLCT 200 transceivers, Mode must =
Server. To prolong battery life, OLCT 200’s sleep most of the time and
therefore may not be Servers. If an application calls for multiple WX16
locations, only one may be set for Server and all others must be Clients. This
single Server transmits a beacon that all of the network’s Clients synchronize
to.
ONLY ONE SERVER PER NETWORK.
Summary of Contents for WX16
