Oldham WX16, User Manual

Page: 5 / 68

WX16 User Manual | 3
2.3.5 Eight / Sixteen Channel Modes 25
2.3.6 Sensor Information 25
2.4 Authorization Mode 25
2.5 LCD Contrast Adjustment 26
SECTION 3 27
3.0 Main I/O Interface PCB #10-0142 27
3.1 Input / Output Optional PCB’s 28
3.1.1 Optional Analog Input PCB #10-0158 28
3.1.2 Optional Discrete Relay PCB #10-0195 30
3.1.3 Optional *Bridge Sensor Input Board #10-0191 32
3.1.4 Catalytic Bead Sensor Initial Setup 33
3.1.5 Optional RTD / 4-20mA Analog Input Board #10-0170 34
3.1.6 Optional 4-20mA Analog Output Board #10-0167 37
3.1.7 Optional Clock / Printer Interface Board #10-0229 38
3.1.7a Clock / Printer System Setup Menu 39
3.1.8 Optional 24 VDC 150 Watt Power Supply 40
SECTION 4 41
4.0 System Diagnostics 41
SECTION 5 44
5.0 ModBus RS-485 Ports 44
5.1 ModBus Slave Register Locations 44
SECTION 6 52
6.1 Panel / Rack Mount Enclosure 52
6.2 NEMA 4X Wall Mount Fiberglass Enclosure 53
6.3 NEMA 4X Wall Mount 316 Stainless Steel Enclosure 55
6.4 XP NEMA 7 Explosion-Proof Wall Mount Enclosure 56
6.5 Main I/O & Option PCB Footprint Dimensions 56
SECTION 7 58
7.0 Adding The “Wireless” Radio Kit Option 58
7.1 Radio Setup Menu 59
7.2 Wireless Receiver Mode 60
7.2.1 Radio Status Alarms - Wireless Receiver Mode 61
7.3 Wireless ModBus Slave Mode 61
7.4 Wireless ModBus Master Mode 62
7.5 Antenna Selection 62
7.5.1 Dipole And Collinear Antennas 62
7.5.2 Yagi Antennas 63
7.5.3 Mounting Near Other Antennas 63
7.5.4 Coax Cables 64
7.6 Surge Protection & Grounding 64
7.6.1 Antenna Grounding 64
7.6.2 Connections to Other Equipment 65