![background image](http://html1.mh-extra.com/html/oldham/bm-25a-aw/bm-25a-aw_user-manual_3707608042.webp)
42
BM 25A/AW
Instruction Manual
Self-healing
NOTE
:
This section covers the ‘
BM 25
’ mode only.
Each BM 25AW broadcasts a message every 10 seconds. Using the example shown
below, if BM 25AW tag A receives no message from BM 25AW tag B for more than 2
minutes, then B is considered as missing by A which turns into fault mode (case No. 2
– Table of alarms) and transfers the information to all other BM 25AWs on the network.
Note that BM 25AW tag B can act the same if it receives no information from A.
Number of BM 25AWs that do not communicate anymore is displayed on each BM
25AW referring a communication fault. This number may differ depending on the BM
25AW you are looking. Here below, one BM 25AW out of four is no longer
communicating.
Figure 28 : One BM 25AW out of four does not communicate
In case of communication failure, the network tries to reestablish communication every
ten seconds.
In
BM 25
mode, if a BM 25AW does not respond or if the network is split, then it is
possible to ignore this fault and to continue to work by the time of the restoration of the
network.
Summary of Contents for BM 25A/AW
