44
BM 25A/AW
Instruction Manual
clears the list of BM 25AWs on the network and forces to a new identification. Similarly
as above, BM 25AWs (units E, F and G) form a second group.
IMPORTANT
:
■
The two groups run independently and alarm or failure events from one group
cannot be transferred to the other group.
■
When the obstacle (the truck in our example) is gone, the communication between
E and D resumes automatically without the need to restart identification. The two
groups merge together to form only one group.
To start a new identification, keep pressing the « acquit » button for 3 seconds. The
display successively shows 3, 2, 1 then « confirm ». Release the « acquit » button and
press again.
Figure 30 : reset sequence of a group of BM 25AWs
NOTE
:
■
When a new identification has started, communication errors are inhibited for one
minute.
■
Once the network healing is completed, it is possible that one or several BM
25AWs remain isolated and stay in fault mode (case No. 1
– Table of alarms). To
acknowledge this failure, turn the unit off or disable the radio communication from
the maintenance menu.
Adding a new BM 25AW to the network at a smart location overcomes the obstacle
and restores the communication between the two groups which then merge together.
This healing is automatic as long as BM 25AW (unit H) belongs to the same network
(same 'Channel' ID).
Summary of Contents for BM 25A/AW
