www.olarm.co/start
Nemtek Energizer Installation Guide
+27 21 009 0911 | [email protected] | www.olarm.co
E & OE. Terms & conditions may apply.
Page
2
2022-02-14
Mount your device using the screws and drill template
provided. We suggest mounting the Olarm PRO
device on a wall as far from the Nemtek energizer as
convenient.
Troubleshooting
If your device LED remains flashing green
for more than 3 minutes - please check the
connection between the Olarm PRO and the
electric fence energizer.
If your device LED is red - please check the
connection between the Olarm PRO and the
electric fence energizer.
If your device LED is orange - please ensure
that the Olarm PRO is located in an area with
good mobile signal strength. If it is not, please
ensure that your device is connected to WiFi
using the wizard inside the Olarm App.
If your device LED is not coming on - please
check the connection between the Olarm PRO
and the electric fence energizer and that the
electric fence energizer is connected to power.
If your device LED remains purple for more
than 15 minutes - please contact Olarm Support:
+27 21 009 0911 or
.
STEP 7 - Mount the Olarm PRO
Note:
• Please do NOT mount the Olarm PRO near any
other radio equipment. They may interfere
with each other and result in your device not
functioning correctly.
• The Olarm PRO device is not weather resistant,
and you will need to install it in a suitable non-
metal enclosure if outdoors.
Please follow the in-app guide to connect your Olarm
PRO to WiFi for enhanced connectivity.
STEP 8 - Connect to WiFi
Note: The Olarm PRO only supports 2.4GHz WiFi.
Note:
• Please note that the Olarm PRO acts as a
keypad when installed on a Nemtek energizer
and will automatically cycle through the
zones to read each zone’s status on multi-
zone energisers. Any key press on the keypad
will stop the zone cycling. The Olarm PRO will
commence zone cycling after not detecting a
key press for 30 seconds.
• Olarm PRO with batch number starting with
2022 onward are compatible.
STEP 6 - Turn the Nemtek electric fence
energizer back on
White
Booting up
Flashing green Connecting to energizer
Flashing blue
Connecting to cloud
Blue
Connected, all okay
Red
Cannot connect to energizer
Orange
Cannot connect to cloud
Yellow
WiFi pairing active
Purple
Firmware upgrading - do not
power the device off
Check your Olarm PRO’s status.
