OKTANTA PE4332 Operation Manual Download

Page: 62 / 63

PEC Flaw Detector PE4332 Operation Manual

+7(812) 385-54-28

MANUFACTURER WARRANTY

The warranty period for the Device is 2 years from the purchase date. Within

the warranty period, the Manufacturer shall rectify faults of the Device provided that
the housing is not damaged and the warranty seals are available.

The Manufacturer may withdraw its warranty obligations when:

The Device is used for purposes other than those specified in this

operation manual;

The equipment operation, storage, and transportation conditions and

requirements specified in this operation manual are not met;

There are mechanical damages of the equipment as a result of careless

handling.

WARRANTY CERTIFICATE

Equipment

PEC Flaw Detector

PE4332________________

Serial Number

______________________________________

Warranty Period

______________________________________

Manufacturer

Oktanta

Mayakovsky Street, 22-34, Saint Petersburg,

+7(812)385-54-28

Signature, stamp

[email protected]

Summary of Contents for PE4332
































































Search results

Summary of Contents for PE4332

Reviews:

Related manuals for PE4332

Brands by name

Popular brands

OKTANTA PE4332, Operation Manual

Search results

Summary of Contents for PE4332

Reviews:

Related manuals for PE4332

Brands by name

Popular brands