OKTANTA PE4332 Operation Manual Download

Page: 61 / 63

PEC Flaw Detector PE4332 Operation Manual

+7(812) 385-54-28

[email protected]

TRANSPORTATION AND STORAGE

During storage and transportation of the Device, maintain the following

climatic conditions:

Air temperature:

+5 to +30



Humidity

80% at +25



Store and transport the Device only in a case from the scope of supply. Avoid

any mechanical damages of the case and Device.

The Device battery will discharge during long-term storage. Long-term

discharge state of the battery can reduce its capacity. So, we recommend to perform
regular check (at least once per year) of the Device charge level and, if necessary, to
recharge the battery.

SCOPE OF SUPPLY

The standard scope of supply of the Device includes:

Flaw detector PE4332

1 pc.

Sensor PEC433202

1 pc.

Cable, 5.5 m

1 pc.

Cable, 1.5 m

1 pc.

Recharger

1 pc.

Operation Manual

Transportation case

1 pc.

Transportation shoulder strap

1 pc.

Summary of Contents for PE4332
































































Search results

Summary of Contents for PE4332

Reviews:

Related manuals for PE4332

Brands by name

Popular brands

OKTANTA PE4332, Operation Manual

Search results

Summary of Contents for PE4332

Reviews:

Related manuals for PE4332

Brands by name

Popular brands