14 / 22
4.2 MOUNTING THE CONTROL UNIT
There are two ways to carry the Control Unit while metal detecting:
•
attached to the Carrying Strap
•
mounted to the Telescopic Rod
Both methods will be explained in the following sections.
4.2.1 Attaching the Carrying Strap
The Carrying Strap is attached to the Control Unit when using the Frame Coil, since there is
no need of the Telescopic Rod at all.
Hook the carabiners of the Carrying Strap into the Loops of the Control Unit.
4.2.2 Mounting the Control Unit
When using the 18 cm or 38 cm Search Coil, the Control Unit may be mounted to the Telescopic
Rod.
1
2
Place the Slider Plate of the Control Unit
directly into the Slider Bracket of the
Telescopic Rod.
Push it completely into the bracket until it
snaps into place.
After the Control Unit has been attached to the Telescopic Rod, you can continue to mount the
Search Coil.
To dismount the Control Unit, first pull the Control Unit downwards and then pull it out of the
Slider Bracket:
1
2
Pull the Control Unit downwards.
Pull the Control Unit out of the Slider Bracket.