HUB-TF_HUB-TFHB_rev042709
7
Always unplug the top section of the earth wire from the base wire when disassembling the housing. Remember to plug
the top and bottom together again when reassembling the housing. UL certification refers only to power converter &
power module.
1. Read and follow instructions
All operating and user instructions should be read and followed before the unit is to be operated.
2. Secure all screws
Please make sure all rust-proof stainless steel screws are installed securely to ensure a waterproof seal.
3. Electrical connections
Only a qualified electrician should be allowed to make electrical connections.
4. Do not disassemble the product
Do not disassemble the product as it is dangerous and may cause damage to the product. Refer all servicing to
qualified service personnel.
5. Handle the product with care
Be careful when handling the product. Do not drop it or subject it to strong shock or vibrations in order to prevent
any damage to the product. Do not handle the product in a wet environment or when your hands are wet.
6. Reducing risk
To reduce risk of fire or electric shock, do not remove cover. Do not open product in wet weather. No user serviceable
parts inside. Refer servicing to qualified service personnel.
7. Unpacking
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to
have been damaged during shipment, please place it properly in its carton and notify the shipper.
8. Installation notice
Tropical, coastal salt water environment:
If you plan to install this product into a tropical, sea, coastal salt water or corrosive industrial water/mist environment,
please seal each stainless screw and fitting with a silicon grease compound. This will help prevent electrolysis
corrosion occurring and extend the lifespan of the product and housing and prevent premature deterioration.
IMPORTANT NOTE
