HUB-TF_HUB-TFHB_rev042709
6
Model
HUB-TF
HUB-TFHB
IP Rating
IP67
Mounting Bracket
Full-Cable Management
Construction
Die-Cast Aluminum Alloy
Coating
Ivory Powder Stove
Heater
No
Yes
Blower
No
Yes
Required Power
Supply / Transformer *
No
24V AC (+/-10%), 40VA
Dimension
17.72”(L) x 5.31”(W) x 5.51”(H) / 450mm(L) x 135mm(W) x 140mm(H)
Weight
8.42lbs / 3820g (with bracket)
9.02 lbs / 4090g (with bracket)
* Power supply / transformer not included
One (1) HUB-TS or HUB-TSHB Camera Housing
One (1) Fully-Cable Managed Bracket
One (1) Operational Manual
One (1) Main Accessories Pack
Three (3) Rust-proof Stainless Steel Wall Screws
Three (3) Rust-proof Stainless Steel Mounting Screws
Three (3) Stainless Steel Washers
Three (3) Plastic Washers
One (1) Allen Wrench
One (1) Secondary Accessories Pack
Two (2) Rust-proof Stainless Steel Camera Mounting Screws
One (1) Rubber Pad
One (1) Plastic Washer
* For any returns, please include all components listed above with original packaging in Resalable Condition.
Absolutely No Returns will be accepted if any component is missing/damaged or if any cable is cut or tampered with.
OKINA USA Products are covered under warranty for one year from the date of purchase. The warranty will
automatically be voided if any of the following occurs:
1. Product sticker is removed
If the product sticker is removed, we will not be able to confirm any information regarding when and where the
product was purchased. We have no other way to verify the purchase record without the serial number on the
product sticker; therefore, it should not be removed.
2.
Product is modified in any way
If the product is scratched, damaged, or modified in a manner not described in this manual, the warranty will be
voided immediately. It is the customer’s responsibility to keep the product in good condition.
3. Power cable is cut
The power cable and any other cable should not be tampered with. Cutting or modifying of the cables will result in
termination of the warranty.
GENERAL SPECIFICATIONS
PACKAGE CONTENTS
WARRANTY