6
ACCESS TO THE CAMERA MENU
Call preset 95: displays the menu of the 360° camera
Use keypad to select item.
Up/down for item chooses, to right enter to sub item.
Call preset 94: will apply immediately the selected mode when user is inside the camera OSD
RS485 CONNECTION WITH DVR
Protocol Configuration
Please go to your DVR RS485 (PTZ) setting. Select the camera and 360
∘
It depends on SDI connect to which channel. If camera is on channel 1, please make sure the address is from
1 to 4. And choose protocol is
PELCO-D
, baud rate is 9600.
Please go to your DVR PTZ control mode to start operate 360°
camera.
NOTE:
When you are inside the camera OSD, if there is suddenly power shortage, the setting will not be saved
in the memory. You must exit the OSD or wait the OSD disappears to validate the modified setting in the
memory.
RS485 port
RS485 cable
Positive
White - Negative
RS485 +
RS485 -
Summary of Contents for HD5FE-8012
Page 15: ...15...
