13
Step 3:
Remove the cover and the inside metal
spacer bracket.
Step 4:
Place the 3 metal ceiling bracket holder
to the ceiling cover ring.
Step 5:
Put the ceiling cover ring on the camera
and make sure the grey mark is visible.
Step 6:
Screw the cover attachment wire and
plug the microphone wire back into original place
and twist the main cover clockwise on the camera
to lock it.
Step 7:
Put the camera into the ceiling.
Step 8:
Then take a screw driver and turn
clockwise. The small will hit the small plastic stick
of the mold until it fits the thickness of the ceiling.
Do the same for the 2 other screws.
Note 1: There are no actual holes on the ceiling
for the 3 mounting screws. These screws and
metal ceiling bracket holders are to keep the
camera from falling off the ceiling.
Note 2: User only needs to make a hole that’s
larger than camera body but smaller than the
ceiling cover. Use the ceiling screws / brackets to
hold the camera body. Don’t need a ceiling
template here. The white color pillars beside the
screws are to keep brackets in proper angle while
you are screwing the brackets.
Summary of Contents for HD5FE-8012
Page 15: ...15...
