OKIFAX 610, Service Handbook

Page: 16 / 147

??3
Table 2.1.1 Standard Performance Specifications ( 3/6 )
NO. Item Specifications
15
16
17
18
19
20
21
4) Shape
5) Opacity
Automatic Document Feeder
( ADF )
Document skew
Effective reading width
Image scanning system
Scanning resolution
Contrast control
Document oversize/ jam
detection
Rectangular
Document allowing less than 40% of the scanner
source light to pass through them
Max 5 documents / A4
Documents shall be placed face down on ADF stacker.
Max. 3 mm skew over a document of A4 length.
210 mm 1%
Contact sensor 1728 bits
Horizontal: 8 dots / mm
Vertical: 1) COPY mode: 3.85/7.70/15.40 line/mm selectable
2) STD mode: 3.85 line/mm
3) FINE mode: 7.70 line/mm
4) SUPER FINE mode: 15.40 line/mm
5) PHOTO mode: 7.70 line/mm
Automatic background sensing
A continuous document background of 0.3 OD ( optical
density ) or less will de transmitted as white.
Up to 297 mm in length.
1) Transmission will stop and line disconnection
will occur when the end of the document is not
detected within 600 mm after scanning begins.
2) A jam will also be declared if the document does
not reach the scanning position within 4 seconds
after the start of a document feed.
Note: When a jam is detected during message transmission, the
machine will stop, but its receiving capability will remain valid.