OKIDATA Pacemark 3410, Service Handbook

Page: 176 / 308

Factory default settings are printed in Bold Italic.
Except as indicated, the menu for the Epson/IBM model is the same as the menu for the
ML/Pacemark model.
Group Item Setting Notes
Set-Up Graphics Bi-directional, Unidirectional Bi-directional prints from left to
right, then right to left. It is
faster, but may cause
registration problems.
Unidirectional prints from left
to right ONLY. It is more
precise, but slower.
Max. Receive Buffer 1 Line, 4K, 16K, 28K Specifies the amount of the
printer’s buffer used to store
data.
Paper Out Override
No, Yes
A sensor stops printing about
1 inch from the bottom of a
single page. Changing this
setting to YES allows printing
to occur closer to the bottom
edge of the paper.
Print Registration 0.25 mm Right,
0.20 mm Right,
0.15 mm Right,
0.10 mm Right,
0.05 mm Right,
0.00 mm,
0.05 mm Left,
0.10 mm Left,
0.15 mm Left,
0.20 mm Left,
0.25 mm Left
Adjusts the vertical
registration in graphics. The
best setting may vary from
one software package to
another.
Maintenance 3 - 90 Pacemark 3410 Service Handbook