Graphics Select/Print
ASCII: ESC * m n
1
n
2
[graphic data]
Dec: 27 42 m n
1
n
2
[graphic data]
Hex: 1B 2A m n
1
n
2
[graphic data]
Selects 8-pin and 24-pin graphic modes and prints graphic data.
Valid only for IBM AGM.
m = 0: Single density, 8-pin, 60 dpi
m = 1: Double density, 8-pin, 120 dpi
m = 2: Double speed, double density, 8-pin, quasi-120 dpi (dots
can not be printed
directly adjacent to one another)
m = 3: Quadruple density, 8-pin, quasi-240 dpi (dots can not be
printed directly
adjacent to one another)
m = 4: CRT I, 8-pin, 80 dpi
m = 6: CRT II, 8-pin, 90 dpi
m = 32: Single density, 24-pin, 60 dpi
m = 33: Double density, 24-pin, 120 dpi
m = 38: CRT III, 24-pin, 90 dpi
m = 39: Triple density, 24-pin, 180 dpi
m = 40: Hex-density, 24-pin, quasi-360 dpi (dots can not be
printed directly
adjacent to one another)
n
1
, n
2
= 0 to 255: specifies amount of subsequent bit image bytes
received,
calculated as n
1
+ (n
2
x 256)
Graphics Select
ASCII: ESC [ g n
1
n
2
m
[graphic data]
Dec: 27 91 103 n
1
n
2
m
[graphic data]
Hex: 1B 5B 67 n
1
n
2
m
[graphic data]
Selects graphics and prints
m = 0: Single density, 8-pin, 60 dpi (same as ESC * 0)
m = 1: Double density, 8-pin, 120 dpi (same as ESC * 1)
m = 2: Double speed, double density, 8-pin, quasi-120 dpi (same
as ESC * 2)
m = 3: Quadruple density, 8-pin, quasi-240 dpi (same as ESC *
3)
m = 8: Single density, 24-pin, 60 dpi (same as ESC * 32)
m = 9: Double density, 24-pin, 120 dpi (same as ESC * 33)
m = 11: Triple density, 24-pin, 180 dpi (same as ESC * 39)
m = 12: Hex-density, 24-pin, quasi-360 dpi (same as ESC * 40)
n
1
, n
2
= 0 to 255: specifies amount of subsequent bit image bytes
received,
calculated as n
1
+ (n
2
x 256)
Miscellaneous
Commands
Select Emulation Mode.
ASCII: ESC { n
Dec: 27 123 n
Hex: 1B 7B n
OKI unique command. Switches printer emulation mode, copying
the custom character data in buffer and saving the print and
receive buffers. Menu settings unaffected.
n = 0, 2: IBM Proprinter
n = 3: IBM XL24 AGM
n = 64, 66: Epson LQ 850, LQ 1050
Select color (color
ribbon installed)
ASCII: ESC r n
Dec: 27 114 n
Hex: 1B 72 n
OKI unique command. Selects print color mode as follows:
n = 0: black
n = 1: magenta
n = 2: cyan
n = 3: violet (two superimposed passes, magenta/cyan)
n = 4: yellow
n = 5: orange (two superimposed passes, yellow/magenta)
n = 6: green (two superimposed passes, yellow/cyan)
Command will be ignored if the Ribbon Selection in Menu is set
to Black.
ML395 ( 96-02-07 )
Summary of Contents for Microline ML395
