OKIDATA Microline ML395, Handbook

Page: 66 / 79

Single Density
Graphics ASCII: ESC K n
1
n
2
[graphic data]
Dec: 27 75 n
1
n
2
[graphic data]
Hex: 1B 4B n
1
n
2
[graphic data]
Dot density 60 dpi horizontal
Maximum data per line: 816 bytes
n
1
, n
2
= 0 to 255: specifies amount of subsequent Bit
Image bytes received, calculated as n
1
+ (n
2
x 256)
Double Density
Graphics ASCII: ESC L n
1
n
2
[graphic data]
Dec: 27 76 n
1
n
2
[graphic data]
Hex: 1B 4C n
1
n
2
[graphic data]
Dot density 120 dpi horizontal
Maximum data per line: 1632
n
1
, n
2
= 0 to 255: specifies amount of subsequent Bit
Image bytes received, calculated as n
1
+ (n
2
x 256)
Double Density/
Double Speed
Graphics ASCII: ESC Y n
1
n
2
[graphic data]
Dec: 27 89 n
1
n
2
[graphic data]
Hex: 1B 59 n
1
n
2
[graphic data]
Same as double density graphics (120 dpi), but
printer can't put two adjacent dots in the same row.
Quadruple Density
Graphics ASCII: ESC Z n
1
n
2
[graphic data]
Dec: 27 90 n
1
n
2
[graphic data]
Hex: 1B 5A n
1
n
2
[graphic data]
Dot density 240 dpi horizontal. Printer can't put two
adjacent dots in the same row.
Maximum data per line: 3264
n
1
, n
2
= 0 to 255: specifies amount of subsequent Bit
Image bytes received, calculated as n
1
+ (n
2
x 256)
Quasi Double
Density Graphics ASCII: ESC y n
Dec: 27 121 n
Hex: 1B 79 n n = 0: Turn off quasi 8-bit graphics
n = 1: Turn on quasi 8-bit graphics
Reassign Graphics ASCII: ESC ? m n
Dec: 27 63 m n
Hex: 1B 3F m n Converts ESC K, ESC L, ESC Y, or ESC Z
command to a graphics select command:
For ESC K: m = 75
For ESC Y: m = 89
For ESC L: m = 76 For ESC Z: m = 90
n = 0: Single density, 8-pin 60 dpi
n = 1: Double density, 8-pin, 120 dpi
n = 2: Double speed, double density, 8-pin,
quasi-120 dpi (dots can not be printed
directly adjacent to one another)
n = 3: Quadruple density, 8-pin, quasi240 dpi (dots
can not be printed directly
adjacent to one another)
n = 4: CRT I, 8-pin, 80 dpi
n = 6: CRT II, 8-pin, 90 dpi
n = 32: Single density, 24-pin, 60 dpi
n = 33: Double density, 24-pin, 120 dpi
n = 38: CRT III, 24-pin, 90 dpi
n = 39: Triple density, 24-pin, 180 dpi
n = 40: Hex-density, 24-pin, quasi-360 dpi (dots can
not be printed directly adjacent
to one another)
Composite
Command ASCII: ESC ! n
Dec: 27 33 n
Hex: 1B 21 n Calculate n as the sum of the values of the features
to be activated. If a feature's value is not included in
the sum, it will be deactivated.
n = 0: 10 cpi
n = 16: Enhanced
n = 1: 12 cpi n = 32: Double width
n = 2: Proportional spacing n = 64: Italics
n = 4: Compressed n = 128: Underlining
n = 8: Emphasized
ML395 ( 96-02-07 )