OKIDATA DOC-IT Series, Fast Start

Page: 9 / 13

9
Basic DOC·IT Functions
Printing
See Chapter 5 in your User's Guide for addi-
tional information on printing.
Here is a summary of compatible printer
drivers which can be substituted for the
DOC·IT drivers.
DOC·IT Compatible Driver
TrueImage

35 Apple® LaserWriter®
II NTX, or
PostScript

Compatible
driver
TrueImage 13 Apple LaserWriter II, or
PostScript Compat-
ible driver
PCL5 HP® LaserJet® III, or
HP Compatible driver
PCL4.5 HP LaserJet IIP, or
HP Compatible driver
To print from Windows
application:
1. Click
File
, then select
Print
.
2. Make sure a DOC·IT driver is selected
(e.g., DOC-IT HP III Comp. on OKIPORT).
3. Click
Setup
if you wish to set paper source,
paper size, or orientation, then click
OK
.
4. Click
OK
. Your application will begin
processing the document to be printed.
Note
: If you're using a DOC·IT driver
on OkiPort, a dialog box will pop
up asking you to select
Print
Only, Fax Only,
or
Print And Fax
.
To print from DOS application:
1. Exit Windows and go to DOS prompt.
Make sure you're in the main DOC·IT
directory (default is c:\docit).
2. Type
config
, then press Enter key.
3. Select ``Display DOC·IT Settings''.
4. Record driver and port # for the LPT port
you're using.
Note
: If you wish to change the LPT
assignments for your emulations,
select “Set Print Emulations”.
5. Press Esc key, then exit to DOS.
6. Enter your DOS application.
7. Refer to your software documentation for
instructions on how to engage a printer
driver and port, and select the appropriate
compatible driver shown in the table above
To eliminate “DOC-IT Print”
pop-up box when printing from
Windows application:
1. Exit Windows

and go to DOS prompt.
Make sure you're in the main DOC·IT
directory (default is c:\docit).
2. Type
config
, then press Enter key.
3. Select ``Display DOC·IT Settings''.
4. Record driver and port # for the LPT port
you're using.
5. Press Esc key, then exit to DOS.
6. Engage Windows and double-click
Windows Control Panel icon.
7. Double-click Printers icon.
8. Select driver you recorded in step 4
above, and click
Connect
.
9. Select port recorded in step 4: click
OK
.
10. With new printer highlighted, click
Set As
Default Printer
.
11. Click
Close
to exit dialog box, then close
Windows Control Panel.
Note
: Alternately, select a compatible
driver from table above, then con-