41605601TH Rev.2
92 /
2
Dark background density
• Has the image drum been exposed to external light?
• Yes
Install the image drum in the printer and wait about 30 minutes.
• No
Perform the cleaning page function (see Section 5.2.2).
• Has the problem been solved?
• Yes
End
• No
Is the heat roller of the fusing unit dirty?
• Yes
Clean the heat roller.
• No
Is the contact of the cleaning roller of the image drum cartridge in contact with the contact
assembly properly (see Figure 6-4
C
)?
• No
Adjust the contact of the cleaning roller to make a proper contact with the contact
assembly.
• Yes
Replace the image drum cartridge.
• Has the problem been solved?
• Yes
End
Note:
After replacing the image drum cartridge, reset the drum counter by clicking
the "Reset" button in the Status Monitor. (See Printer Handbook).
• No
Replace the main control board or power supply/sensor board.
3
Blank paper is output.
• Is the LED head being connected properly (check the HEAD1 and HEAD2 connectors on the main
control board and PC connector on the LED head)?
• No
Connect the LED head properly or replace the head cable(s).
• Yes
Is the contact of the image drum cartrige in proper contact with the ground contact properly
(see Figure 6-4
C
)?
• No
Adjust the ground contact (Drum) of the contact assembly.
• Yes
Replace the LED head.
• Has the problem been solved?
• Yes
End
Note:
After replacing the LED head, set the LED head drive time (See 4.2).
• No
Replace the main control board or power supply/sensor board.
Summary of Contents for OKIPAGE 14e
