41605601TH Rev.2
156 /
3.3.6
Roller-A and B
While only the removal procedure for roller-A is described here, the removal procedure for roller-B
is basically same. When removing roller-B, however, be careful not to deform the sensor plate.
(1) Remove the upper frame [ see 3.3.2 steps (1) through (3) ].
(2) Remove the separator assembly (see 3.3.2).
(3) Remove the OLEV-11-PCB (see 3.3.3).
(4) Remove the motor bracket (see 3.3.5).
(5) Remove the gear
1
.
(6) Shift the roller-A
2
to the right, lift it on its left side and slide it out (the bearing
3
also comes off
while you are doing this, so be careful not to lose it).
Roller-B
Sensor Plate
3
2
1
Summary of Contents for OKIPAGE 14e
