background image

Safety Information

3

Safety

Installation Hints

- Install the machine in a dust-free location away from direct sunlight.

- Place the machine near an electrical outlet that is easily accessible.

- Do not plug the machine into a power source shared by items that

produce electric noise (e.g., air conditioner, etc.).

- The design of this machine requires electrical grounding, and is thus

supplied with a three-wire grounded power cord.  For your safety as
well as that of others who may operate the machine, please do not
attempt to alter the power cord by modifying the grounding prong.

- The Line jack is for connecting the machine to a standard telephone

line.  To avoid damage to telephone systems and/or the machine, do
not plug the machine into anything other than a standard RJ-11C
jack.

- The TEL jacks on the back of the machine are only suitable for two-

wire devices.  Some standard telephones may not respond to
incoming signals when connected to an extension socket.

- The machine may not necessarily provide the effective transfer of a

call from a telephone connected to the same line.

- The operation of this machine on the same line as that of a tele-

phone or other device equipped with an audible warning device or
automatic call detector may result in bell vibration (sporadic ringing)
or false tripping of the call detector.  If such a problem occurs, the
user is requested to NOT contact the telephone company.

- Adjustment of the electrical/electronic components in the machine

requires an authorized service technician.  Do not attempt to make
adjustments yourself. Any alterations made by an individual other
than an authorized service technician may be cause for nullification
of the product warranty.

Summary of Contents for OKIOFFICE87









































Reviews: