English
28
Installation
6
To accept the language change, press the Yes
key.
7
Press the Select Function key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private
telephone system used to route internal calls. If you
have to dial a prefix (access) number to get an
outside line, then your line is connected to a PBX.
If you are connecting your fax machine to a PBX,
follow the instructions below. These setting changes
allow your fax machine to identify your PBX’s
outside line dial prefix digits in the numbers that
you program or dial in your fax machine. After it
dials the prefix digits, your fax machine will wait
until it sees that the outside line is available before
dialling the rest of the number.
Warning:
In some countries you may require service
assistance to make these changes. Also, some PBX
installations may require additional adjustments to your
fax machine. If you continue to have difficulty with fax
communication after following these steps, contact your
dealer.
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
3
On the numeric keypad, press 2. The display
will show 2:DIAL PARAMETER.
4
Press the Yes
key until the display shows
PBX LINE, [OFF].
5
Press the No
key. The display will change to
PBX LINE, [ON].
6
Press the Yes
key until the display shows
DIAL PREFIX, [OFF].
7
Press the No
key. The display will change to
DIAL PREFIX, [ ] ENTER 4DIGITS.
8
Using the numeric keypad, enter the number you
normally dial from your PBX to obtain an outside
line.
9
Press the Space One Touch key until the display
changes.
10
Press the Yes
key.
11
Press the Select Function key to finish.
Tip:
Keep in mind that all of the outside telephone
numbers you program into your fax machine will have
to begin with your PBX’s dial prefix.
Tip:
To later turn off the PBX LINE and DIAL PREFIX
functions, follow Steps 1-7 above. At Step 8, press the
Space key four times.
