Oki OKIFAX 5700, Maintenance Manual

Page: 21 / 472

OKIFAX 5700/5900 1 - 15
No. Item Specifications
17 Recording resolution
18 Copy resolution
19 Recording method
20 Recording paper skewing
21 Copy darkness
22 Copy uniformity
23 Recording paper running out
24 Minimum scan line time for
receiving
Horizontal
• 600 dot/inch
Vertical
• 300 dot/inch (EX-FINE), 15.4 line/mm (EX-FINE), 7.7
line/mm (FINE), or 3.85 line/mm (STD)
Variable:
• STD: 200 dot/inch x 3.85 line/mm
• FINE/PHOTO: 300 dot/inch x 300 dot/inch
• EX-FINE: 600 dot/inch x 15.4 line/mm
Electro-photographic printing
• 211.3 mm (4992 bits) LED print head
Maximun allowable skew is + or - 1 mm over any advance
of 100 mm.
1) Black image: Greater than 1.2 OD *
2) White background (unprinted area): Not greater than
0.2 OD
Note: OD: (Optical dencity)
Printed copies will exhibit a uniform density of printed and
background areas:
1) From edge to edge: 25%
2) From copy to the next copy: 30%
The fax can detect the no-paper condition by a
photosensor.
When the paper has run out in the local copy operation,
the scanning will stop with “PAPER JAM” on the LCD and
an ALARM LED turn on without an alarm tone.
When the paper has run out while a message is being
received and the no-paper reception is activated, the LCD
display will show “MSG. IN MEMORY”, and the Alarm
LED turn on.
0 ms, when receiving in ECM mode of from an Oki Data
facsimile.
5 ms at 15.4 line/mm or 7.7 line/mm and 10 ms at 3.85 line/
mm when receiving from a non-Oki Data facsimile or non-
ECM mode.
STD
Fine
Ex-Fine (15.4 line/mm)
Ex-Fine (300 dot/inch) 3.85 ~ 4.96
7.7 ~ 9.93
15.4 ~ 19.87
300 ~ 387 3.85 ~ 5.28
7.7 ~ 10.57
15.4 ~ 21.15
300 ~ 412
A4
Letter