Overview
6
Unimessage Pro
|
Software Installation
Introduction
On the CD supplied with your OKIFAX 5650 MFP Kit you
will find the software that enables you to print, scan, copy
and send fax messages from your desktop using your fax
machine.
!
Note: These installation instructions apply to all three
versions of Unimessage Pro: Unimessage Pro Xlite,
Unimessage Pro, and Unimessage Pro LAN.
Before starting software installation, ensure that your fax
machine is connected to the parallel printer port on your
computer and the fax machine is turned on
Save all open documents and close all other applications
before proceeding with driver installation.
!
Note: Complete your installation of the driver
software before installing the PC fax application
software.
Minimum System Requirements
Before you install Unimessage Pro you should make sure that
you have an IBM-compatible PC running Windows 95, 98,
NT4 or above. The following minimum specification is
recommended:
• Pentium 120MHz, 16 MB Ram when running Windows 95
or 98 First Edition.
Microsoft Windows 95 OSR1 Service Pack 1 is
recommended.
• Pentium 120MHz, 32 MB Ram when running Windows
NT4 or 98 Second Edition.
When using Windows NT4 please ensure that Microsoft
NT4 Service Pack 4 or later is installed.
• Pentium 133MHz, 64 MB Ram when running Windows
2000 - 128 MB Ram recommended.
A 24-Bit color video card and driver is recommended.
