10
OKIFAX 5650 MFP Option Kit
|
6. During copying, the
Find Fax Port
dialog appears and the
fax port is found.
7. When the
Modem Installation
dialog appears, click
OK
.
8. When the
Install New Modem
dialog appears, do the
following:
Note: If the
Modems Properties
dialog appears, click
Add
and the
Install New Modem
dialog pops up.
(a) Check
Don’t detect my modem; I will Select it from
a list.
, and click
Next
.
(b) Click
Have Disk
, and when
Install From Disk
dialog
appears, type D:\DRIVER\SETUP\DISK1\WINNT40
(where D is the drive letter of your CD-ROM drive) in
Copy manufacturer’s files from
and click
OK
.
(c) When the
Install New Modem
screen appears, select
the appropriate device and click
Next
.
(d) Check
Selected ports
, then select the port displayed in
Step 6 and click
Next
.
(e) Click
Finish
, and when
Modems Properties
dialog
appears, click
Close
.
9. When the
Install Complete
screen appears, click
OK
.
10. The setup of the driver is complete.
Unimessage Setup
After the installation of the OKIFAX driver is complete, the
installation of the Unimessage Pro software should begin. If
this does not happen or you are re-installing the Unimessage
software:
a) Insert the OKIFAX 5650 MFP Option Kit CD-ROM
into your CD-ROM drive.
b) After the setup program has automatically started,
click Setup Unimessage Pro and follow the on-screen
instructions.
Note: If the setup program does not automatically start
or
Auto insert notification
is turned off, click
Start
→
→
→
→
→
Run...
. Type in D:\SETUP.EXE (where D is
the drive letter of your CD-ROM drive) and click
OK
.
1. The first screen asks you to select a language. If the
highlighted language is appropriate, click
OK
. Otherwise,
select a language and click
OK
.
2. When following the on-screen instructions, make sure you
select the following when prompted:
Yes, look for devices
connected to this computer and install the appropriate
drivers
and
CLASS 1 device
