Oki MC560 MFP CX2032, Service & Troubleshooting Manual

Page: 31 / 91

31
System Maintenance/Adjustments
User's Maintenance Menu
This is a maintenance menu category among the normal menu categories.
(Different from the system maintenance menus) The items that can be set under this menu are indicated below.
Shaded areas are default setting.
Operator Panel Display
Category
Item (Upper Display) Value (Lower Display)
Function
MENU RESET EXECUTE Initializes menu settings.
SAVE MENU EXECUTE
Stores current menu settings.
RESTORE
MENU
EXECUTE
Changes menu settings to stored ones. Displayed only when
menu settings have been stored.
POWER SAVE ENABLE
DISABLE
Sets Power Save mode enabled/disabled. Shift time
to enable Power Save mode can be changed using
“POWER SAVE SHIFT TIME” on “SYSTEM CONFIG.MENU”
PAPER BLACK
SET 0
+1
+2
-2
-1
Corrects print non-uniformity due to temperature variation.
With faded images, change the value. With scattering or
snowing images in print output of high print density, decrement
the value. With faded images in print output of high print
density, increment the value.
PAPER COLOR
SET 0
+1
+2
-2
-1
Corrects print non-uniformity due to temperature variation.
With faded images, change the value. With scattering or
snowing images in print output of high print density, decrement
the value. With faded images in print output of high print
density, increment the value.
OHP BLACK
SET 0
+1
+2
-2
-1
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is blurred.
If an output shows a scattered- or snowing-like phenomenon in
a high-density print part, decrement the value. If an output is
blurred, increment the value.
Maintenance
Menu
OHP COLOR
SET 0
+1
+2
-2
-1
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is blurred.
If an output shows a scattered or snowing-like phenomenon in
a high-density print part, decrement the value. If an output is
blurred, increment the value.