Menu option switching
Only while displayed as shown in a shaded area [XXXXX], the level of the self-
diagnostic mode can be switched.
[2]
or
[8]
is used to switch to the option in a non-
shaded area [XXXXX].
Normal Operation Mode
LEVEL0- engine status
display
Engine status display
(Heater temperature)
(Ambient temperature and
humidity display)
Voltage display during printing
(TR, CH, DB or SB)
Toner sensor
Waste toner sensor
RFID internal noise motor
Error detail
[2] and [*] held down
in combination (for
three seconds)
[2],[8],[6] and [4]
pressed in
combination
momentarily
SWITCH SCAN
MOTOR & CLUTCH TEST
TEST PRINT
REG ADJUST TEST
DENS ADJ TEST
CONSUMABLE STATUS
PRINTER STATUS
FACTORY MODE SET
SENSOR SETTING
LED HEAD DATA
NVRAM PARAMETER
21
Holding down [4] or [*] or momentarily pressing
[2]
or
[8]
switches between the options
in shaded areas [XXXXX].
[2]
or
[8]
is used to switch between the options in non-shaded
areas [XXXXX]. Holding down
[4]
restores the display that selects an option.
