1.LOADING PAPER
Loading Paper on the MPT 31
LO
AD
ING PA
PER
3
Align the side guides to the length of the envelope. Move the paper holding lever toward the
equipment.
4
Check that there is no gap between the paper and the side guides.
If the gap is too wide, it could cause paper jamming, or the paper size could not be correctly detected.
Between the paper and side guides (“A” in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
jamming occurs, make a gap.
5
Select the MPT during the operation for copying or printing and specify the paper size and
thickness.
For details for the operation for copying or printing, refer to the
Copying Guide
or
Printing Guide
.
A
A