Loading Paper in Trays 11
LO
AD
ING PA
PER
0.
Loading Paper in Trays
Follow the procedure below to place paper in the tray, Paper Feed Unit, Paper Feed Pedestal, or Additional Drawer
Module. For acceptable paper, refer to the
Specifications Guide
.
Be careful not to let your fingers be caught when pushing the tray into this equipment.
This could injure you.
Be careful not to cut your fingers when fanning.
This could injure you.
Fan and jog the stack of paper well before you place it in a tray, or the sheets may not be separated before being
fed.
Place paper with its copy side up. The copy side may be noted on its wrapping paper.
Never put anything in a vacant space in the tray after the paper has been loaded. Otherwise, it may cause paper
jams or an equipment malfunction.
Paper Feed Unit for this equipment
1
Pull out a tray carefully until it comes to a stop.
2
While holding the green lever of the side guide in the direction of the arrow, set the side guide to
the paper size (E.g. A4-R).
Adjust the side guides with both hands.
